Environmental protection
Packaging materials can be recycled. Do not dispose of the packaging in household waste. Instead it should be returned for
recycling. Discarded units contain recyclable materials that should be recycled. Batteries, oil and similar items must not get into
the environment. Dispose of scrapped units in an appropriate recycling system.
Discarded units contain recyclable material that should be recycled. Batteries, oil and similar substances must not be released
into the environment. Hand over scrapped units to a suitable recycling system.
Discarded filters contain recyclable material that should be recycled. Transfer used filters to a suitable recycling system.
For more information, please contact your nearest recycling center.
Work area environment
Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.
CAUTION
Do not rinse the machine with water.
Overload
Never let the machine work fully throttled, as this poses a risk of overheating.
Bodily injuries
CAUTION
Never try to change electrical connections yourself. An error can be fatal!
Never allow the extraction point to make contact with any part of the body. The strong negative pressure can damage blood
vessels in the skin.
WARNING
When installing, handling, and transporting the machine, protective gloves must be worn to prevent personal
injury from sharp edges.
Power cord
Never pull the machine by the power cord. Keep the power cord away from heat and sharp objects. Regularly inspect the power
cord.
If using an extension cord, it must be waterproof.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.
Important safety precaution
The machine must only be used if all filters are intact and fitted properly.
Turn off the main power switch and disconnect the machine from the power supply before cleaning or performing maintenance on
the machine.
Care and maintenance
Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.
16
DC 5900H, Art.nr. 94380-B