Panel Description - RS Pro RS-820 Manual De Instrucciones

Mini lnfraRed Thermometer/English

4.Panel description

Laser
Button instruction
1. switch button(automatic switch off after about 10 seconds)
2. Laser on/off button
3. C/F and buzzer on/off button
4. Max/Min button
5. Display screen
5
4
4
lnfrared Sensor
3
2
1
13/05/2017 Version No. 001
LCD interface instruction
1. Scan symbol
2. Measure data
3. Temperature value for Max/Min
4. Data hold symbol
5. Laser on symbol
6. Buzzer on symbol
7. Lower power symbol
8. C/F symbol
Measurement operation
1. Hold the meter by the Handle Grip and point it toward
the surface to be measured.
2. Pull and hold the Trigger to turn the meter on and begin
testing. The display will light if the battery is sufficiently
charged.
Replace the battery if the display does not light.
3. Release the Trigger and the HOLD display icon will
appear on the LCD indicating that the reading is being
held. In HOLD status, press the laser button to turn on or
off the laser. Press the buzzer button to turn on or off the
backlight.
4. The meter will automatically power down after
approximately 10 seconds after the trigger is released.
Switching C/F
Press the C/F button two seconds until the C/F symbol
changes.
Switching Max/Min
Press the Max/Min button.
Switch on/off laser
Press the laser key
13/05/2017 Version No. 001
Mini lnfraRed Thermometer/English
5 6
4
1
2
3
7
8
5