How To Install Your Canopy Housing; How To Assemble Your Ceiling Fan Blades - Fanimation SCULPTAIRE FP8511 Serie Manual De Instrucciones

Ocultar thumbs Ver también para SCULPTAIRE FP8511 Serie:

Manual de instrucciones (44 páginas)

Tabla de contenido

Idiomas disponibles

NOTE: This step is applicable after the neccessary wiring

is completed.

1. Remove one of the two shoulder screws in the

hanger bracket. Loosen the second shoulder screw

without fully removing it. Assemble canopy by

rotating key slot in canopy over shoulder screw in

hanger bracket. Tighten shoulder screw. Fully

assemble and tighten second shoulder screw that

was previously removed. (Figure 1)

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.

2. Securely attach and tighten the canopy screw cover

over the shoulder screws in the hanger bracket utilizing

the keyslot twist-lock feature. (Figure 2)

How to Assemble Your Ceiling Fan Blades

1. Position the blade over the blade holder of motor

assembly with threaded posts showing. Make sure the

bottom edge of the blade is fully seated against the

blade holder. Place blade plate over the blade with holes

aligned and assemble blade to blade holder of motor

assembly using

Do not connect fan blades until the fan is completely

installed. Installing the fan with blades assembled

may result in damage to the fan blades.

To reduce the risk of personal injury, do not bend the

blade holders when installing, balancing the blades

or cleaning the fan. Do not insert foreign objects in

between the rotating blades.