Service And Customer Care - Kenwood BL900 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
blending thicker mixtures
e.g. spreads, pates, dips etc.
Half fill the goblet and switch on.
Stop the machine to scrape the
mixture back onto the blades as
necessary. If the mixture is very
difficult to process, add a little more
liquid.
mayonnaise
When making mayonnaise, place all
the ingredients with the exception of
the oil into the blender. Remove the
filler cap and with the motor running
gradually add the oil in a steady
stream.
IMPORTANT NOTE
For safety reasons we do not
recommend the blending of very hot
liquids. You can ensure long life for
your blender by switching off
promptly especially when using dry
ingredients. The blender runs at
such high speeds that all foods are
processed within one minute.
Prolonged running or repeated use
should be avoided especially when
processing dry ingredients or small
quantities. When switching off wait
until the blades have stopped
revolving before removing the
blender. The blender is not suitable
as a storage container, therefore
ingredients should not be left to
stand in the goblet before
processing and should be removed
immediately afterwards.
If your machine is fitted with a plastic
goblet then various spices such as
Cloves, Dill and Cummin seeds have
an adverse effect upon the plastic
and should not be processed.
cleaning
The blender should be disassembled
before cleaning. Wash the goblet, lid,
filler cap and sealing ring in hot
soapy water, then dry thoroughly.
Brush the blades clean under the
tap taking care to keep the
underneath dry, then leave to air dry.
Take care as the blades are sharp.
Do not leave blade unit soaking in
water.
service and customer
care
G
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
UK
If you need help with:
G
using your machine or
G
servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood customer care on 023
9239 2333. Have your model
number ready - it is located on
the underside of the power unit.
G
spares and attachments
call 0870 2413653.
G
other countries
Contact the shop where you bought
your machine.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
G
you have not misused, neglected or
damaged it;
G
it has not been modified (unless by
Kenwood);
G
it is not second-hand;
G
it has not been used commercially;
G
you have not fitted a plug incorrectly;
and
G
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
4
Tabla de contenido
loading

Este manual también es adecuado para:

Bl910

Tabla de contenido