HoMedics LSS-10H Guia De Inicio Rapido página 4

LSS-10H-C SP/ENG 10/30/03 9:50 AM
BackMasseur
On/Off Cycle
To turn on the massage Press CYCLE to activate
functions, first press the traveling massage. The L.E.D.
POWER button. The L.E.D light corresponding to the
indicator will illuminate and button on the hand control will
confirm your selection. To illuminate to verify your
turn off the massage selection. Motors will alternate
functions, simply press the massage action, starting at
button again. your neck and shoulders and
travelling down to your thighs,
up and down the cushion's
Power Adapters
surface. To deactivate cycle
Back Masseur is powered by action, simply press the
a custom 120 volt AC home button again and the
adapter, and 12 volt DC auto corresponding L.E.D. light will
adapter (cigarette lighter turn off. At any time, you may
plug-in style). Both are disengage any one or any
included with your unit. combination of massaging
motors. When you do,
corresponding L.E.D. lights
will indicate your selection.
Note: When selecting
the heat feature with
massaging action, there will be
a slight decrease in the
strength of the massage
output. This adjustment is
perfectly normal and should
not be interpreted as a defect.
Page 7
10-motor Seat Massager
Targeted
Massage
Buttons
Buttons activate
motors to target
specific areas:
neck and
shoulders, upper
and lower back,
buttocks, and
thighs. Custom
program your massage
by choosing a specific
area, any combination of
areas, or all five. When you
select any or all of the five
positions, the corresponding
L.E.D. lights will illuminate. To
deselect, simply press the
button again and the
corresponding L.E.D. lights
will turn off.
6
Heat Cycle Speed
Soothing, penetrating heat is Choose the speed at which
activated with this button. To your custom programmed
turn off heat, simply press the massage travels up and
button again. A glowing L.E.D. down Back Masseur. With
light indicates that heat is on. each press of the button,
the cycle speed increases,
creating three levels: low (L),
medium (M) and high (H).
Corresponding L.E.D. lights
will indicate your selection.
To decrease speed, simply
press the button again.
Massage
Strength
Choose the intensity of
your massage. Back
Masseur gives you
three options of
massage strengths: low
(L), medium (M) and
high (H). L.E.D. lights
correspond to your
selection. To change
the strength of
your massage,
simply press the
button again.
Special Functions
Back Masseur incorporates
3 exclusive preprogrammed
functions that can be easily
selected by pressing the
special functions button.
Once activated, you can
move from one function to
another by simply pressing
the function button again. All
3 special functions allow you
to choose the body zones
activated, and the speed and
intensity of your massage.
(F1) Pulsating
Massage:
All 10
vibrating motors turn
on and off, giving you
an intense pulsating
massage.
(F2) Side-to-Side
Massage:
Switches
the massage back and
forth, from your left
side to your right.
(F3) Circulating
Massage:
Massage
runs in circular fashion
around the cushion
surface, to reflect your
blood's circulation.
7