Battery Replacement - x-sense XS01-WR Manual Del Usuario

01 02

Battery Replacement

1. To replace the battery, detach the smoke
alarm from the mounting bracket by twisting
counterclockwise.
2. Pull the battery removal tab to remove the
battery, and then install a new battery, matching
the correct polarity markings.
3. Test the alarm, and then mount the alarm
onto the mounting bracket by twisting clockwise
to lock the alarm.
03 04
10
LED Indicator and Audible Alarm
Status
Normal
Alarm
Test Single Smoke Alarm
All interconnected smoke alarms
in the network
Silence Mode
LED indicator Audible alarm
Action
Red LED fl ashes None
once every 6 0
seconds.
Red LED flashes Short quick
once every beeps
second.
Red LED flashes 3 short quick
Press the test/
once every beeps
silence button once.
second.
Red LED flashes Continuous Hold down the test/
once every beeping until silence button.
second. you release
the test/silence
button
Red LED flashes None
once every 5
seconds.
11