Anti-High Temperature; Burst Prevention; To Prevent Falling Wounding; Uv Protection And The Bulb Explosion - Mark BEAM 190 Instrucciones De Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN
2.1
ANTI -HIGH TEMPERATURE
ta =40°C
Please don't use the equipment if the temperature above 40 ℃
2.2

BURST PREVENTION

The lens should be changed if had damaged or any problems. Don't change the
non-original manufacturer lens.
¢119mm×23mm
Len size :
2.3

TO PREVENT FALLING WOUNDING

Please don't move the package by one person only.
When Hang the fixture, please must verify that the facilities to be able to withstand
the weight of the lamp s at least 10 times more.
Please make sure the Mounting hardware is strong enough no any damage, and
insurance for the safety rope as auxiliary security fixed in other facilities will need to
verify before installation. Installing or removing the equipmen t, to make the pulley
below the work location
2.4

UV PROTECTION AND THE BULB EXPLOSION

Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture
The Fixture should be used with the protection screen together.
2.5
PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the identified
power , voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
2.6

TO PREVENT BURNING OR FIRE

1,The fixture can be mounted directly on the surface of ordinary combustible material.
2.
Do not short-circuit temperature protection switch or fuse, use the specified type of fuse
3.
The equipment must be installed away from inflammable and explosive materials
4.
The equipment should be projected range of 3 meters away objects and projectiles temperature
less than 60 ° C; .
BEAM 190
User Manual/Manual de uso
.
.
Pag 6

Capítulos

Tabla de contenido
loading

Tabla de contenido