Chauvet DJ Intimidator Spot DUO 155 Guía De Referencia Rápida página 6

Tabla de contenido
Intimidator Spot Duo 155 QRG
Master Auto
Programs
Master Auto
4-Head
Program
Master Auto
2-Head
Program
The Master Auto built-in programs control the actions of two Intimidator Spot
Duo 155 units linked together by DMX data connection. A single Intimidator
Spot Duo 155 (the master) controls the actions of another Intimidator Spot Duo
155 (the slave). Configure the Master Auto programs in conjunction with the
Slave modes as follows:
The Master Auto 4-Head program allows all 4 heads of two linked Intimidator Spot
Duo 155 units to operate in unison. The master unit will be set to operate in Auto
mode with the M--4 setting, while the slave unit will be set to operate in either Son1
or Son2 mode.
Configure the units as indicated below.
Master unit:
1.
Press <MENU> repeatedly until M--2 or M--4 shows on the display.
2.
Press <UP> or <DOWN> to select M--4.
3.
Press <ENTER>.
4.
Set the master to run in Auto mode, A-01–A-16.
Slave unit:
1.
Press <MENU> repeatedly until Son1 or Son2 shows on the display.
2.
Press <UP> or <DOWN> to select Son1 or Son2.
·
Select Son1 for 100% synchronized actions.
·
Select Son2 for a delayed show with all 4 heads in the same direction.
3.
Press <ENTER>.
The Master Auto 2-Head program allows a single Intimidator Spot Duo 155 to
control the actions of another Intimidator Spot Duo 155. The master unit will be set
to operate in Auto mode with the M--2 setting, while the slave unit will be set to
operate in either Son1 or Son2 mode.
Configure the units as indicated below.
Master unit:
1.
Press <MENU> repeatedly until M--2 or M--4 shows on the display.
2.
Press <UP> or <DOWN> to select M--2.
3.
Press <ENTER>.
4.
Set the master to run in Auto mode, A-01–A-16.
Slave unit:
1.
Press <MENU> repeatedly until Son1 or Son2 shows on the display.
2.
Press <UP> or <DOWN> to select Son1 or Son2.
·
Select Son1 for 100% synchronized actions.
·
Select Son2 for the same show with both units, but the actions of the
slave are in the opposite direction of the actions of the master.
3.
Press <ENTER>.
6
EN
Tabla de contenido
loading

Tabla de contenido