Set duress code
The default duress code is 1111. Duress code can be used when the user is threatened
to disarm the system. When using duress code to disarm the system, the control panel
will dail out silenty. Change the duress code by following the menu:
Left is the response of the alarm system show when texting "15"
Duress code:
to the control panel. Copy the message and change the duress
1111
code (four digits).
Duress code:
2345
Operate successfully.
In the App:
31
X500-UM-EN-IT-ES-PT-V1.0.indd 38-39
15
Set timing
Below is the response message of the alarm system shown when texting "16" to the
control panel. Copy the message and adjust the timing as shown below.
16
Timing:
Left is the response of the alarm system show when texting "16"
1.00:00 0
.
to the control panel
Copy the message and change the settings
2.00:00 0
3.00:00 0
4.00:00 0
5.00:00 0
6.00:00 0
Timing:
1.09:00 1
2.18:00 0
3.00:00 0
4.00:00 0
5.00:00 0
6.00:00 0
Operate successfully.
IMPORTANT:
"0" = TURN OFF THE TIMING. "1" = ARM. "2"=DISARM.
Please synchronize panel time before set timing. See details on page 34.
EN
.
32
2016/12/9 9:27:54