Check Point Smart-1 205 Guía De Introducción página 44

Hardware Diagnostic Tool and Restoring Factory Defaults
2. Connect to the appliance using a terminal emulation program such as Microsoft
HyperTerminal or PuTTY.
a) Configure the terminal emulation program:
In the HyperTerminal Connect To window, select a port from the Connect

using list.
In PuTTY select the Serial connection type.

b) Define the serial port settings: 9600 BPS, 8 bits, no parity, 1 stop bit.
c) From the Flow control list, select None.
3. Reboot or turn on the appliance.
4. When this message shows, hit any key to activate the Boot menu. You have about
four seconds.
Press any key to see the boot menu [Booting in 5 seconds]
5. From the Boot menu, select HW Diagnostics
6. Press Enter.
To Run the Diagnostic Tool from the LCD Panel keys:
1. Reboot or turn on the appliance.
2. When the countdown begins, press any of the arrow keys. You have about four
seconds.
3. From the Boot menu, select HW Diagnostics
4. Press Enter.
44 | Smart-1 205/210 Appliances Getting Started Guide