Configuring Smartevent; Preparing Smartevent In The Security Management Server Environment27 - Check Point Smart-1 205 Guía De Introducción

CHAPTE R 4

Configuring SmartEvent

In This Section:
Preparing SmartEvent in the Security Management Server Environment
Preparing SmartEvent in the Multi-Domain Server Environment
Defining the Internal Network for SmartEvent
Defining Correlation Units and Log Servers for SmartEvent
This section explains how to get up and running with SmartEvent.
To generate reports about network events for the Firewall and VPN Software Blades,
use SmartReporter
Preparing SmartEvent in the Security
Management Server Environment
To configure SmartEvent, first establish connectivity between the components.
1. Launch SmartDashboard to the Security Management Server.
2. In SmartDashboard, create a new host for each computer that contains a
component of SmartEvent:
a) Select Manage > Network Object > New > Check Point > Host
b) In the General Properties window, click Communication and enter the
activation key.
Note - If the Security Management Server and SmartEvent are installed on
different sides of the firewall, add a rule that allows SIC traffic between them.
c) The version is not entered automatically if the SmartEvent version is newer
than the version of the Security Management Server. If so, select the most
recent version available from the Version drop-down list.
d) In the Management Software Blades list, select SmartEvent.
("Configuring SmartReporter" on page 31).
Smart-1 205/210 Appliances Getting Started Guide
....................
..................................................
............................
...... 27
28
29
30
| 27