Preparing Smartreporter In The Multi-Domain Server Environment - Check Point Smart-1 205 Guía De Introducción

Configuring SmartReporter
c) The version is not entered automatically if the SmartReporter version is newer
than the version of the Security Management Server. If so, select the most
recent version available from the Version drop-down list.
d) In the Management Software Blades list, select SmartReporter.
3. Install the database on all log servers from which SmartReporter reads data:
select Policy > Install Database and select the log servers as the targets.
Preparing SmartReporter in the Multi-Domain
Server Environment
To connect SmartReporter to one Domain, define the SmartReporter object in the
SmartDashboard of the Domain
Management Server
This procedure shows how to connect SmartReporter to all Domains.
To connect SmartReporter to all Domains:
The first stage configuring SmartReporter is to establish connectivity between the
components.
1. Launch Global SmartDashboard to the Multi-Domain Server.
2. In Global SmartDashboard, create a new host for each computer that contains a
component of SmartReporter:
a) Select Manage > Network Object > New > Check Point > Host.
b) In the General Properties window, click Communication and enter the
activation key.
Note - If the Multi-Domain Server and SmartReporter are installed on different
sides of the firewall, add a rule that allows SIC traffic between them.
c) The version is not entered automatically if the SmartReporter version is newer
than the version of the Multi-Domain Server. If so, select the most recent
version available from the Version drop-down list.
d) In the Management Software Blades list, select the SmartReporter blade.
3. Select Close and OK.
4. From the File menu, select Save.
32 | Smart-1 205/210 Appliances Getting Started Guide
("Preparing SmartReporter in the Security
Environment" on page 31).