Cleaning other parts of the machine
Cleaning the coffee circuit
3 Remove the used capsule drawer by pulling it up and empty it.
Caution: Be careful when you remove the used capsule drawer.
Capsules are still hot immediately after brewing.
4 Rinse all parts under a warm tap. Dry all parts with a soft cloth. You can
also clean all these parts in the dishwasher.
5 Reinsert the used capsule drawer into the waste water drawer.
6 Insert the waste water drawer with the used capsule drawer into the
machine.
7 Place the drip tray back onto the lower drip tray. Place the cup platform
onto the drip tray.
1 Clean the outside of the machine with a soft damp cloth.
Caution: Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the machine.
Warning: Do not insert a finger into the capsule compartment
to avoid injury. There is an invisible piercer inside.
2 Clean the front of the machine with a soft damp cloth and clean the two
parts of the coffee dispensing spout (the coffee outlets and the spout
cover) under a warm tap or in the dishwasher.
3 Clean the water tank by rinsing it under a warm tap. The water tank is not
dishwasher-proof.
Note: Rinse the water tank and fill it with fresh water every 24 hours.
Clean the coffee circuit every week to ensure you get coffee with an
optimum quality and taste.
English
15