Unfolding; Brake; Fitting The Safety Harness; Reclining The Backrest - JANE ROCKET2 Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
B. UNFOLDING
Release the folding catch found on the left rear leg.
Open the chassis pulling the handlebar upwards until you hear it click
locked into place.
1
. b
WARNING: It is essential to make sure that the child is kept at a
!
safe distance when folding and unfolding this product.
WARNING: It is unavoidable that there are sharp points
!
and places where fingers could get trapped during these
operations.
C. BRAKE
Your ROCKET pushchair has a braking system that works simulta-
neously on both rear wheels. Use it as a parking brake whenever you
can, it is an important safety element.
To put the brake on push the right brake pedal (red) down.
To take the brake off push the left brake pedal (green) down.
You should always put the parking brake on when getting the child in
and out of the pushchair.
ATTENTION: Once you have put the brake on, make sure that
!
1
the pushchair has braked correctly. It may be necessary to push
. a
the pushchair gently for the brake to be fully activated.
D. FITTING THE SAFETY HARNESS
The pushchair is fitted with a safety harness to keep your child safe
at all times. Fasten the child in with the safety harness every time you
use the pushchair.
To unfasten the belt system press the button in the middle of the har-
ness until the straps come undone.
To fasten the belts bring the two side connectors together and then
insert them in the harness until you hear them click into place.
3
-
.c
Adjust the belts so they fit the child correctly and snugly. To adjust the
length of the belts, slide the buckles upwards or downwards. Make
sure that the belts are not twisted.
E. RECLINING THE BACKREST
The backrest of the pushchair can be reclined to carry the baby in the
2
. a
most comfortable position possible at all times. To lower the backrest
2
. b
pull the strap with the red logo on the back of the pushchair down-
wards to the required position.
To raise the backrest pull the strap with the black logo upwards.
3
. a
3
. d
4
. a
3
.b
4
. b
23
EN
Tabla de contenido
loading

Tabla de contenido