Marmitek CONNECT 236 Modo De Empleo página 7

Battery installation
1. Open the battery cover
Push and slide the battery cover open.
2. Insert the battery
Insert two AAA size batteries, observe the correct polarity.
3. Closing the cover
Close the battery cover until a click is heard.
System connections
Note:
1. To prevent any possible problems, always disconnect the power plug or switch Off the
POWER button of the Connect 236 before connecting or disconnecting the cables.
2. When connecting the cables, always insert the pin plugs correctly into the connecting
jacks. Insufficient insertion may result in no-sound problems or generation of noise.
Connecting through a Scart, Composite video and Audio
Make connections as the diagram shown below. When connecting the related devices, refer
to the related instruction manual.
CONNECT 236™ 7