NuWave Bravo XL Manual Del Propietário página 24

INSTRUCTIONS
• Press hold PROBE for
1 sec. to display the
set temperature of the
Probe. Turn START/
PAUSE to adjust
temperature, if desired.
• Press PROBE to
display the current
internal temperature of
your food.
8. Once the set temperature
of the Probe is reached,
the Bravo will stop cooking
and End will be displayed.
Notes:
• When the Probe is
unplugged and PROBE
is pressed, Prb1 (error)
will be displayed and the
unit will beep three times.
This indicates PROBE was
pressed but that the Probe
plug was not inserted into
the Probe Input (Jack).
• If your cooking temperature
is set lower than the
set Probe Temperature,
and START/PAUSE is
pressed, Prb2 (error) will be
displayed and the unit will
beep three times.
• If Probe temperature was
not reached after preset
cooking time finished, the
unit will continue cooking.
To see remaining cooking
time, press TEMP/TIME
twice (if not cooking within
a timed countdown). ON will
be displayed and stay at ON,
indicating that the preset
cooking time has run out.
Using Sear 1 2 with Probe
Example: Sear 1 » Stage 1,2,3
» Sear 2 » Warm » Probe
temperature 200F (93C). If
24 24
instructions
Probe temperature achieved
200F (93C) at stage 2, the
Bravo will stop cooking for
remaining stages but still
cook your food for Sear 2 and
Warm functions.
To avoid "unsafe" status (Probe
is shunted outside of the cavity
but oven started working with
the Probe set and activated),
the Bravo will shut off when:
1. If the target temp is over
250F (121C) and the Probe
does not increase in 5F (1C)
after 60 min, shut the unit off
immediately.
Or
2. If the target temp is under
250F (121C) and the Probe
does not increase in 5F (1C)
after 120 min, shut the unit
off immediately. "Prb4" will be
displayed.
Note: To cancel any function
or stage during the cooking
cycle, press TEMP/TIME (if
not cooking within a timed
countdown) and turn START/
PAUSE Dial until time reads
00:00. This will stop the function
and move on to the next
function in the cooking cycle.
TOAST
TOAST activates the TOAST
menu function. The default
temperature is 425F (218C),