Wiring Schematic; Optional Motorized Water Shutoff Valve - North Star NSCWHC Manual De Instalación Y Operación

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Power

Supply

120V AC

60 Hz

Optional Motorized Water Shutoff Valve

The Motorized Water Shutoff Valve (sold separately)

may be used with this North Star Wi-Fi connected

water softener and the iQua™ app to remotely turn

off the home's water supply. For example, you may

want to turn off the water when going away on vaca-

tion. Install the motorized shutoff valve in the plumb-

ing, upstream of the softener (see page 9), and plug

the cable into the softener's electronic control board

with the power off (see page 9 and Figure 64).

On the iQua™ app, near the bottom of the softener's

main dashboard, there is a line labeled "Water

Control" with a button that, when pressed, alternates

between "Water On" and "Water Off". If you receive

an alert indicating continuous water flow, you can use

this control to remotely shut off the water.

The system default for triggering a continuous water

flow alert is 20 minutes of flow at 0.4 gallons per

minute or higher. The time and water flow trigger val-

ues may also be adjusted in the "Alerts" section.

To manually operate the motorized water shutoff

valve, pull out the round knob on the valve and turn it

until the red line in the sight glass matches the

desired (open or closed) position. See Figure 65. If

you manually operate the valve, the app's "Water

Control" feature will be disabled until you reset it by

clicking "Yes" next to the "Regain Control?" prompt.