Canon EOS C300 Mark II PL Manual Del Usuario página 8

Important information about the EOS C300 Mark II PL
Attaching a PL Lens
1 Holding a bayonet ring handle, turn the
bayonet ring counter-clockwise to remove the
camera's body cap.
• Remove also the dust caps from the lens.
2 Attach the lens to the camera aligning a groove
on the lens with the PL lens index pin on the
mount.
3 Turn the bayonet ring clockwise to fix the lens
in place.
Removing a PL Lens
1 Holding a bayonet ring handle, turn the
bayonet ring counter-clockwise to release the
lens.
• Remove the lens and replace the dust caps.
2 Replace the body cap on the camera and turn
the bayonet ring clockwise to fix it in place.
Camera Functions Not Available when Using a PL Lens
When a PL lens is attached to the camera, the following functions will not be available.
• Aperture adjustment
• Focus functions except for manual focus and two focus assistance functions, peaking
and magnification.
Unavailable Menu Settings
The following submenus and settings will not appear in the menu. Refer also to
Options
in the Instruction Manual.
• The following submenus under [v Camera Setup]:
[Light Metering], [AE], [Iris], [Focus], [Periph. Illum. Corr.], [Chromatic Aberr. Corr.].
• The following settings under [¢ Picture/Terminals Setup] > [Custom Display 1]:
[Light Metering], [Focal Length], [Focus Mode], [Iris], [Lens].
Assistance Functions] > [Focus Guide].
• [
3
PL lens index pin
Menu