Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Identify the (3) mounting points for each bracket by looking under the passenger side of the vehicle and finding the three (3) locations
where the vehicle body is mounted to the frame.
Passenger side front
1
Beginning at the passenger side front (location 1 above), remove
Position front bracket in place (location 1 above) and
the body mount bolt.
reinstall body mount bolt. Repeat for mid and rear
Repeat at locations 2 and 3 shown above.
brackets (location 2 and 3 above). Do not fully tighten
at this time.
2
3
Mounting bracket
Position nerf board alongside vehicle. Begining with the passenger side front (location 1 above) align the two holes in nerf
board with the corresponding two holes in bracket. Loosely attach nerf board to brackets using (2) bolts, (2) lock washers,
and (2) flat washers. Do not fully tighten at this time.
Repeat for remaining mounting locations (location 2 and 3 above).
4
Page 2 of 3
Tabla de contenido
