Environment Operating Conditions; Device Safety Compliance; Product Compatibility And Incubation Programs; Bionova ® Minibio Incubation Programs - TerraTec Bionova MiniBio Manual Del Usuario

Safety information

Environment operating conditions

Environmental
Conditions
Altitude
Operation temperature
Relative Humidity
Installation/overvoltage
Degree of contamination
Storage temperature
Voltage

Device Safety Compliance

Bionova MiniBio Auto-reader Incubator complies with the
®
following standards and directives:
IEC 61010-1
Electrical Safety.
IEC 61010-2-010
Low Voltage Directive
2014/35/EU.
Electromagnetic
EN 61326-1
Compatibility (EMC).
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU.
European Commission.
WEEE Directive 2012/19/EU.
Bionova MiniBio Auto-reader Incubator do not represent
®
photobiological risk and do not generate dangerous optical
radiation in any of its normal operation conditions as per the
requirements of IEC 62471 Standard.
Designed under Quality Management System standards ISO
13485:2016/NS-EN ISO 13485:2016.
Product Compatibility and
Incubation programs
Bionova MiniBio Incubation Programs
®
The following incubation programs are available for your
Bionova MiniBio. Verify which incubation programs are available
®
for your country checking the Indications for Use section.
Operating Units
Conditions
3500 (máx.) Meters
10-30 Celsius
30-80 %
category II
2
10-30 Celsius
12 DC Volts
Bionova
Temperature
Time selection
selection
20 min (Ultra)
60 ºC
30 min
1 hs.
2 hs.
3 hs.
37 ºC 4 hs.
To select the appropriate incubation program for the Indicator you
are planning to use, follow each Indicator's Instructions for use.
Select the appropriate incubation program before
the incubation of any Indicator.
Bionova MiniBio Auto-reader compatible indicators
®
We develop new Indicators for extending the features of
our incubators regularly. Please visit www.terragene.com/
compatible or scan the QR code below to check the latest
compatible Indicators developed for your incubator.

Serial/Batch Number

For easy identification, each Bionova
Incubator has a distinctive serial and batch numbers. The number
can be found printed on two labels, one placed at the bottom of the
Incubator, and one on its packaging. Please, register your serial and
batch numbers in this manual for future reference:
Serial number:
Batch number:
MiniBio Page 7
®
Incubation Program
20 min. at 60°C
30 min. at 60°C
1 hour at 60°C
2 hours at 60°C
3 hours at 60°C
4 hours at 37°C
MiniBio Auto-reader
®