Where To Install - universalblue UVT131-21 Manual De Instrucciones

WHERE TO INSTALL

• Make sure that the place where the fan is going to be installed is
quite wide, as this will allow a better air flow and that the fan
blades do not come into contact with any object, minimum space
of 0.6m on each side.
• Do not place the fan in an open space, or in a room where there
is moisture or exposure to water.
• If the chosen location does not have a suitable support beam
capable of supporting 45Kg, install a 2"x4" support between the
roof beams as a support medium.
• Make sure that the bracket for hanging the fan to the ceiling or
other suitable structure is capable of supporting at least 45Kg,
with the two long fixing screws included. Make sure that at least
30 mm of the screw is screwed into the bracket.
• Only the fans with a support rod or bar can be installed on sloping
roofs where the angle of inclination does not exceed 25º. This
model cannot be installed on sloping roofs.
•
Since the installation of the equipment sets, the power of the
network must be done through flexible cable plug or by pole
switch with contact opening distance not less than 3 mm.
28