Safety Instructions - GYS Tool it DBT 350 Manual De Instrucciones

Translation of the original instructions
EN
BATTERY TESTER DBT 350

SAFETY INSTRUCTIONS

This manual includes guidelines on the operation of your device and the
precautions to follow for your own safety.
Ensure it is read carefully before first use and keep it handy for future
reference.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
The battery tester should only be connected to batteries with a rated
output voltage of 12 V and 24 V .
CAUTION : Reverse polarity will cause the fuse to blow and could cause
permanent damage. Damage due to reverse polarity is not covered by
our warranty.
CAUTION : If the car's battery is disconnected, some management
systems may be disabled.
Consult your vehicle manual for more information on installation.
Do not use the battery tester if the cord or terminals are damaged.
Do not use the battery tester if it has received a severe shock or has been
damaged in any way.
Do not disassemble the device. Incorrect reassembly may result in a risk
of electric shock or fire.
Acid projection hazard!
• Wear appropriate safety glasses and clothing.
• If your eyes or skin come into contact with battery acid, rinse the
affected part of the body with plenty of water and seek immediate
medical assistance.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-circuiting.
The device complies with European Directive.
The certificate of compliance is available on our website.
EAC conformity mark (Eurasian Economic Commission)
‫م‬
Equipment in conformity with Moroccan standards. The declaration C
of conformity is available on our website.
This product should be disposed of at an appropriate recycling facility.
Do not dispose of in domestic waste.
Product whose manufacturer is involved in the packaging's recycling pro-
cess by contributing to a global system of sorting, collecting and recy-
cling of households' packaging waste.
Recyclable product that falls within waste sorting recommendations
7