Boost Function - Thermor AEROMAX SPLIT 2 Manual De Uso

Warnings
Information
Settings
5.

BOOST function

This function allows for increasing the hot water production selectively. Heat pump and
electric heating element are switched on simultaneously. The "off peak hours" signal will
not be considered. The number of days in the
nominal temperature (55 ° C) is fixed.
When the set period expires, the water heater will return to its normal mode.
Le function can be deactivated at any time.
10
Warranty
Set heating range:
This mode allows for defining the admissible range
for starting the heat pump's
and the electric heating element's operation.
H.P. 24h/ELEC 24h
H.P. 24h/ELEC OP
H.P. OP/ELEC OP
H.P . Prog/ELEC Prog
Connecting the water heater
The water heater is compatible with the Cozytouch service, if the
software iO-homecontrol® is used.
Required: Internet access,
Cozytouch Software (included),
Cozytouch app for free download.
The Cozytouch app on your smartphone or tablet facilitates con-
trolling your water heater.
To connect the devices, please observe the respective manual.
To delete the app, please reset your connection.
Use
Switch heat pump and electric heating
element on at any time of the day
Switch heat pump on at any time of the
day
Switch electric heating element on only
during off peak hours
Switch heat pump and electric heating
element on at any time of the day
Switch heat pump and electric heating
element on for the period programmed.
Settings in 1st range: from 4h to 12 h.
Setting both ranges: 8 h minimum in
total.
Connectivity
mode can be set from 1 to 7. The
Servicing
Heating times
H.P 24h/ELEC 24h
HP. 24h/ELEC OP
HP.OP/ELEC OP
HP.Prog/ELEC Prog