Tripp-Lite B024-DUA8-SL Manual Del Propietário página 31

Kvm dvi / usb para instalación en rack con uso compartido de audio y periféricos
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Basic Operation
Skip Mode
This feature allows you to switch between computers in order to monitor them
manually. You can stay on a particular port for as long as desired, as opposed to auto-
scanning, which automatically switches after a fixed interval.
To initiate Skip mode:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press one of the arrow keys [
enter Skip mode. Depending upon which arrow key is pressed when entering
Skip mode, you will enter at a previous or later port used than the one being
currently accessed (see table below). You can switch ports, as follows:
Arrow Key Description
Skips to the previous accessible port in the installation.
Skips to the next accessible port in the installation.
Skips to the next accessible port in the installation. If the next
accessible port is on a cascaded switch, it skips to the first accessible
port of that switch.
Skips to the previous accessible port in the installation. If the previous
accessible port is on a cascaded switch, it skips to that switch's last
accessible port.
• Once in Skip mode, you can continue skipping between ports by pressing the
arrow keys.
• While Skip mode is in effect, ordinary keyboard and mouse functions are
suspended – only Skip mode compliant keystrokes can be input.
3. To exit Skip mode, press [Esc] or [Spacebar].
USB Keyboard/Mouse/Hub Reset
In the event the keyboard, mouse, or USB hub ports are not operating correctly, a
reset may be required. To perform a reset, follow the steps below:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press and release the [F5] key.
Hotkey Beeper Control
When performing a keyboard hotkey command, a beeper sounds to indicate the
command is taking place. This beeper sound can be toggled on/off by performing the
following steps:
1. Activate Hotkey Setting mode using the aforementioned command.
2. Press and release the [B] key.
17-10-479-93370A.indb 31
] to automatically exit Hotkey mode and
31
11/17/2017 2:29:03 PM

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

B024-dua8-dl

Tabla de contenido