Specific Safety Rules; Intended Use; Environmental Protection - Ryobi RHT700RL Traducción De Las Instrucciones Originales

■
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.

SPECIFIC SAFETY RULES

■ Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating power tools may
result in serious personal injury.
■ Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer, always fit the cutting device
cover. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
■ Hold the power tool by insulated gripping surfaces
only. The cutter blade may contact hidden wiring or its
own cord. Cutter blade contacting "live" wire may expose
metal parts of the power tool "live" and could give the
operator an electric shock.
■ Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by blades.
■ Thoroughly inspect the area where the machine is
to be used and remove all rocks, sticks, metal, wire,
bones, toys, or other foreign objects.
■ If a residual current device is required, use an RCD
with a tripping current of 30mA or less.
■ Do not use the trimmer without front handle in
place. Keep both hands on handles when the unit is
in use.
■ If the power cord or extension cable becomes
damaged during use, disconnect the cord from the
supply immediately. Return to authorised service
centre for repair or replacement.
■ Never cut or trim anywhere you cannot clearly see
the entire length of the blades. Failure to do so can
2
result in personal injury to the operator and bystanders,
as well as damage to the unit.
■ It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking
and work practices are all thought to contribute to
the development of these symptoms. It is presently
unknown what, if any, vibrations or extent of exposure
may contribute to the condition. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
● Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaud's Syndrome.
● After each period of operation, exercise to increase
blood circulation.
● Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see
your physician about these symptoms.
■ The vibration level during actual use of the power
tool can differ from the declared total value
depending on the ways in which the tool is used.
Identify safety measures to protect yourself based on
an estimation of exposure in the actual conditions of
use, taking account of all parts of the operating cycle
such as the times when the tool is switched off and
when it is running idle in addition to the trigger time.

INTENDED USE

■ This product is intended for cutting and trimming
hedges, bushes and shrubs.
■ It is intended for operation below shoulder level and for
domestic use only.
■ Do not use for any other purpose.

ENVIRONMENTAL PROTECTION

Recycle raw materials and waste electrical
products instead of disposing of as waste.
The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
SYMBOL
Safety alert
V Volts
English