Kohler K-9677 Guia De Instalacion página 5

Upright Installation
Handshower
Screen/
Washer
Handshower
Washer
Washer
Water Source
2. Install the Handshower
From the top of the bath or finished deck, insert the smaller end
of the interlock hose down into the hose guide and through the
mounting hole.
From the underside of the bath or finished deck, insert one
washer into the flexible hose. Thread the flexible hose into the
high pressure hose.
Insert one washer into the other end of the high pressure hose.
Connect the high pressure hose onto a vacuum breaker (if
installed), or onto the appropriate water source.
Run cold and hot water through the handshower hose to flush
out dirt and debris. Check for leaks.
Turn the cold and hot water supply off.
For an elbow installation: Insert one washer into the bottom of
the elbow assembly. Thread the bottom of the elbow assembly
onto the interlock hose. Insert a screen washer into the top of the
elbow assembly. Thread the handshower onto the elbow
assembly.
For an upright installation: Insert one screen washer into the end
of the handshower. Thread the handshower onto the handshower
hose.
To avoid kinking, be sure to remove any twist loops in the hose.
Kohler Co.
Elbow Installation
Handshower
Screen/Washer
Elbow Assembly
Washer
Interlock Hose
Interlock Hose
Washer
High Pressure Hose
5 113747-2-DB