Parts Diagram; Set-Up Instructions - Fluval BREEDING BOX Manual De Instrucciones

CAUTION!
This aquarium is a breeding box for aquarium fish. DO NOT use this
aquarium for other than its intended use.
You need an air pump (discharge rate: less or equal to 1 L/ per minute) and
an extra airline tube. (Sold separately)
Turn the power off before performing maintenance.
DO NOT allow small children to touch or play with the aquarium.
USAGE REQUIREMENTS
For use with frameless aquariums:
Only use with aquariums with a glass thickness of 5 mm
or more.
For use with framed aquariums:
The width of the frame must be less than 26 mm (1").
Frameless Aquarium:
more than 5 mm of
glass thickness

PARTS DIAGRAM

* Refer to the images and confirm all parts are included.
* Operation requires an air pump and a second airline tube(sold separately).

SET-UP INSTRUCTIONS

Use attachments when glass thickness of main aquarium is more than
5mm and less than 10 mm.
1. Wash all parts without using soap.
2. Hang empty breeding box on the main aquarium.
Use leveling adjuster to make sure the bottom of
the box is perpendicular to the aquarium wall.
DO NOT twist the leveling adjuster while it
remains inserted. Pull it out when adjusting.
3. Attach an O-ring to the intake tube and slide
less than 5 mm
Framed Aquarium:
less than 26 mm of
frame thickness
less than
26 mm
more than 26 mm
Box
Leveling
adjuster