Powersoft Mezzo Serie Guia Del Usuario página 38

LED Charts
MEZZO
MEZZO
General
LED Color
MEZZO
Status
Network
Signal
Switched
Status
Network
Signal
Maximum Voltage Selection
LED Color
70V
100V
70V
100V
70V
100V
Pushbutton LED Chart - Amplifier ON
LED Color
Status
Network
Signal
Status
Network
Signal
324 AD
CLASS2
WIRING
Lighting
Green Solid ON
324 AD CLASS2
WIRING
Blue Low Intensity
Red Solid ON
Yellow Solid ON
Green Solid ON
Blue Solid ON
Green Solid ON
Yellow Solid ON
Blue Solid ON
Cyan Solid ON
Green Solid ON
OFF -
All Cyan All Blinking
Lighting
Green Solid ON
OFF -
OFF -
Green Solid ON
Solid ON
Green
Green
Solid ON
Lighting
OFF -
OFF -
Purple Solid ON
OFF -
Cyan Solid ON
OFF
-
STATUS
NETWORK
SIGNAL
2 1
4 3 2 1
Limiting in one or more channels
Both analogue and Dante input signals present
'Switched' ethernet operation mode enabled
'Split' ethernet operation mode enabled
Amplifier selected in ArmoníaPlus or blinking command triggered.
Push button pressed for more than 2s.
Auto configuration ready to be triggered following button release.
Push button pressed for more than 5s.
Ethernet operation mode ready to be changed following push button release.
STATUS SWITCHED
NETWORK 70V
25V
SIGNAL 100V
4 IN 3 4 OUT
2 IN 1
-10 dBV
STATUS SWITCHED
NETWORK 70V
25V
SIGNAL 100V
Description
4 IN 3 2
2 IN 1
Amplifier on and operational
-10 dBV
In standby
Hardware fault
Temperature warning
Ethernet up and operational
Connected to remote control
Analogue input signal present
Dante input signal present
Description
70V Selected
100V Selected
25V Selected
Description
CAL
3s
6s
CTRL + CTRL +
3
CTRL
I4 I3 I2 I1 5V
CAL
3s
6s
CTRL + CTRL +
IN 1
CTRL
I4 I3 I2 I1 5V