Cancelling The Program; Salt Indicator ( ); Rinse Aid Indicator ( ); End Of Program - Fulgor Milano F6DWT24SS2 Manual De Usuario

C
The machine will remain
silent in pause mode for
some time in order to
remove the water from the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.
6.7 CANCELLING THE
PROGRAM
Open the door of the product press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.
C
There might be residues
of detergent or rinse aid
in the machine and/or on
the pieces being washed
depending on the step the
program you have cancelled
was in.

6.8 SALT INDICATOR ( )

(MODEL DEPENDING)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.

6.9 RINSE AID INDICATOR ( )

Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears
on the display of your machine.
Adjusting the amount of rinse aid
1. After turning on the machine,
press Time Delay and P+
keys simultaneously. After the
countdown (3, 2, 1) is displayed
keep the keys pressed for a while.
2. Press P+ to move to position (P)
on the display.
3. Set to the appropriate level with the
Time Delay key.
4. Press On / Off key to save the
setting.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in
P:2 position.
3 doses of rinse aid are dispensed in
P:3 position.
4 doses of rinse aid are dispensed in
P:4 position.

6.10 END OF PROGRAM

C
When the program you have
selected comes to an end,
an audible warning signal
will warn you to turn off your
machine. This audible signal
will warn you with certain
intervals before it turns off.
25
USA