Walgreens WGNBPA-750 Manual De Instrucciones página 12

4. After all symbols disappear, the display
will show "00". The monitor is "Ready
to Measure" and will automatically
inflate the cuff to begin measurement.
The cuff will start deflating as
measurement continues.
Note:
This monitor will re-inflate automatically if the system
detects that your body requires more pressure for
measurement.
5. When the measurement is completed, the
cuff will deflate entirely. Systolic pressure,
diastolic pressure and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically
stored into memory.
Note:
• This monitor automatically returns to standby mode
approximately 30 seconds after last operation. You may also
press the START/STOP button to return to standby mode.
• To interrupt the measurement, you may press the START/
STOP (recommended), MEM, USER- SELECT or DATE/
TIME SET ( ) buttons. The cuff will deflate immediately
after a button is pressed.
SYS.
mmHg
DIA.
mmHg
21
Using Triple Check Measurement:
1. Please make sure the Triple Check measurement switch,
located on the back of the unit, is in the ON position.
2. Press the USER-SELECT button. After the user number
is selected, press the START/STOP button to confirm
the chosen user.
3. With the cuff wrapped around your arm, press the
START/STOP button. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 3 seconds.
Note:
If the Rest Assure feature is ON, the 5 minute countdown
will begin after checking procedure is complete.
4. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
The cuff will begin deflating as measurement
continues.
Note:
This monitor will reinflate automatically if the system
detects that your body requires more pressure for
measurement.
Triple Check Rest Assure
ON OFF AM/PM ON OFF
Date Link
22