Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Complete the Finished Wall (cont.)
Thin Wall Installation
Remove the plaster guard from the backing plate.
Twist the plaster guard dome to separate it from the outer ring.
Discard the outer ring.
Slide the dome over the valve stem.
Provide a 4" (102 mm) diameter hole in the wall material.
Make openings for the stops (if included) by using the holes in
the backing plate as a guide.
Secure the backing plate to the back of the wall material.
Do not remove the dome until instructed to do so.
1205550-2-C
12
Kohler Co.
Tabla de contenido
