Rosenbauer HEROS Titan Pro Información Para El Usuario página 7

HEROS Titan Pro – Rosenbauer
This protective helmet must be handled, checked and maintained in the manner
EN
described in this user information and the instructions for use.
In order to safeguard this helmet against premature aging, store it in a place
which offers maximum protection against light and moisture.
All repair work, component exchange and servicing on this helmet may only be
undertaken according to the appropriate guidelines pursuant to these instructions
for use. All activities must be logged. Only specialists authorized by ROSENBAUER,
may carry out fundamental maintenance and servicing work, not described in this
user information.
Before and after every use, each element of the helmet assembly must be
inspected carefully for cleanliness, tears, cracks, holes and any physical damage.
In the case of unusual damage (loads) on the helmet shell, the interior harness,
the chinstrap or other parts, these must be exchanged immediately in order to
guarantee the defined protective function.
Only original parts may be employed for the maintenance of this helmet.
Subsequently applied paint on the helmet surface, or stickers not approved by
ROSENBAUER, can alter the characteristics of the material and are not allowed.
No alterations may be made to the helmet assembly.
During operations in areas subject to the danger of explosions, the breathing
apparatus mask and the helmet should be treated with anti-static spray, or a
water film should be applied.
The helmet shell is covered with a functional paint coating (impact resistant).
Possible damage to the paint may have a negative effect upon the protective
function of the helmet and should therefore be repaired immediately by a
specialist.
The visors of this helmet are made of high-performance polycarbonate.
In extreme temperatures even the best helmet visor materials lose their stability.
Deformed visors (due to thermal loads) must be exchanged immediately. Visors
are wear parts and should be stocked in sufficient quantities.
The ear covers are made of soft, flexible material, offering limited mechanical
protection only.
Ear covers are wear parts and should be stocked in sufficient quantities.
This protective helmet will lower your ability to feel heat. Even though you do not
7