Rosenbauer HEROS Titan Pro Información Para El Usuario página 14

Rosenbauer – HEROS Titan Pro
c) Ratchet system does not work properly
Ear covers - Replace if any of the following conditions are evident
a) Cut, or broken stitching
b) Nomex layer discoloured, charred or perforated
General
a) Inspect carefully for all screws to be securely tightened
2.6 Retirement criteria
Your fire department or employer must determine whether or not your protective
helmet assembly is ready for retirement and replacement.
The service life of this protective helmet will vary depending upon how much it has
been used and how well it has been cleaned and maintained.
If you are unsure whether your protective helmet should be retired, do NOT use it.
Unless the responsible authority determines that your protective helmet is ready for
retirement earlier, the over all service life of this protective helmet shall not exceed a
total period of 15 years.
3. MAINTENANCE
Take extreme care that at all time as well as after replacement of elements all fixing
parts, screws, sliders etc. must be securely locked again and adjusted properly to
ensure the safety function of all elements.
3.1 Chinstrap replacement
The chinstrap can be simply removed using an Allen key for the screws left and right
and loosen the neck strap velcro fixing. Replace the chinstrap and reinsert using the
reverse procedure.
14