Emerson CWT-00 Instalacion, Cuidado & Uso página 4

These instructions assume hot/cool faucet has already been installed. Refer
to Installation, Care & Use manual included with hot/cool water dispenser.
Follow these steps for installing chilled water tank with instant hot/cool water dispenser.
1
PREPARATION
A
Property Damage: Do not place objects
on top of chilled water tank which
could obstruct the fan.
OVERVIEW OF A TYPICAL INSTALLATION with Instant Hot Water Dispenser
Filter
Instant
Hot Water
Tank
Note: Chilled water tank must be plugged
directly into open wall outlet.
4
< 18"
Instant Hot/Cool
Water Dispenser Faucet
Copper Tubing
Air-Activated
SinkTop Switch
™
I I
Unplug instant hot water tank and
hold handle in open position until
cool water flows from spout.
I I
Turn off water supply.
I I
Identify the undersink location for the
chilled water tank.
I I
For best performance, allow for a
minimum 2" space around the sides
and top of the chilled water tank.
I I
The chilled water tank will require
a minimum footprint of 15" wide
by 11" deep.
I I
Ensure that there is a minimum of 18"
vertical clearance for the chilled water tank.
Blue Tubing
White Tubing
Shown with optional filtration
Food
Waste
Disposer
Chilled
Water
Tank