Sangean RCR-1 Instrucciones De Manejo página 13

Note:
If the alarmed week day(s) or alarm mode is not selected,
display will blink all the week days or show
seconds indicating the alarm is not set and disappear, the
alarm will not be activated.
Note:
If you like to be awoken by the radio station you are listening,
press Alarm system 1 or 2 for more than 2 seconds, the
appliance will store the radio alarm station, then follow above
procedures 2-8 to set radio alarm.
Alarm with HWS alarm beep
1. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button
(15 or 14). Display will blink selected alarm system symbol ..
2. Press alarm SET button 16, display will blink both alarm hour
and alarm mode with a beep.
3. Press alarm mode button 20 to select alarm buzzer mode until
display shows
4. Press + or – to adjust required alarm hour then press SET
button again, display minute digits will blink. Press + or – button
to adjust required alarm minute.
5. Press week day selection 1-7 (Sunday – Saturday) to select
required alarm week days . Display will show the days of the
week on which you wish to be woken by the buzzer alarm.
6. Press alarm button 1 or 2 to confirm all the alarm set with a
beep. Display will show
is set.
Note:
If the alarm week day (s) is not selected, display will blink all the
week days and
.
indicating HWS buzzer alarm
, the alarm will not be activated.
for a few
12
GB