Makita BFL201R Manual De Instrucciones página 4

ENGLISH
1 Red part
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Lamp
7 LED#A
SPECIFICATIONS
Model
Hard joint
Fastening
torque
Soft joint
Square drive
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screwdriving in wood, metal and
plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated
adherence to screwdriver safety rules. If you use
this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious per-
sonal injury.
4
Explanation of general view
8 LED#B1
9 LED#B2
10 Screw
11 Angle head
12 Hole for adjusting grip
13 Ring
14 Scale
BFL201R
10 – 20 N•m
10 – 20 N•m
9.5 mm
-1
) 360
429 mm x 72 mm x 98 mm
1.7 kg
use) replace
BFL301R
16 – 30 N•m
16 – 30 N•m
9.5 mm
477 mm x 72 mm x 98 mm
2.0 kg
D.C. 14.4 V
IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
GEB017-1
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
strict 5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
7. Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
15 Adjusting grip
16 Yellow line
17 Compression spring
18 Socket
19 Hole
20 Pin
260
477 mm x 72 mm x 98 mm
BFL402R
25 – 40 N•m
25 – 40 N•m
9.5 mm
200
2.0 kg
ENC007-2