Molift Air Tilt
2
3
Components:
1.
Molift Air 350 Tilt
2.
Quick release pin
3.
Molift Air Tilt Hand control
4.
Cable for connection to Molift Air 350 Tilt
5.
Molift Air Tilt Sling bar
About Molift Air Tilt
Molift Air Tilt Sling bar is an accessory to Molift Air 350 Tilt ceiling
hoist as an alternative to standard sling bars. The Molift Air Tilt
has clip studs for clip sling attachment (accessory) and with the
adjustable sling bar, supported by an electric actuator, it allows
the caregiver to control and adjust the position of the patient,
e.g. from upright to reclined.
Product identification
Product label
1. Product label, 2. Product label, 3. Actuator label (Linak),
4. Serial number label
Molift Air 350 Tilt
Gross weight 361kg / 797lbs
SWL 350kg / 772lbs
24V SLA, IP24
Duty cycle 10%
1
4
Molift Air Tilt Sling bar
Gross weight 279,5kg / 616lbs
SWL 272kg / 600lbs
24V SLA, IP24
5
Duty cycle 10%
Warning labels and Symbols
Symbols used on the product, explained in more detail:
Compliance to all relevant
EC directives
Refer to user manual
Indoor Use only
Max user weight
Do not dispose in general
waste
WEEE Directive
2002/96/EC
Low battery indicator (hand
control)
China Pollution control
mark (also indicates
recyclability) China RoHS
legislation
Australian Regulatory
Compliance Mark –
EMC, Electrical safety (RCM)
2
Molift Air Tilt / www.etac.com
IEC 60417-5172:
Class II equipment
Operating instructions
Manufacturer
Date of manufacture
YYYY-MM-DD
Catalogue number
Serial number
Medical Device