Pulsar ACCOLADE 2 LRF Guia De Inicio Rapido página 6

Installing Battery Pack into the Device
Lift up the lever (16).
•
Remove the battery (9) from the
•
charging pad.
Insert the battery (9) as far as it will
•
go into the slot of the device body
designed for it so that the F part is at
the bottom.
Lock the battery (9) by lowering the
•
lever (16).
Using Built-in Laser Rangefinder
Press the ON/OFF button (1) briefly to power the device on.
•
Press the UP button (2) briefly to start the rangefinder. The rangefinder reticle
•
will appear in the center of the display.
• Place the rangefinder reticle on the target
to measure the distance.
Briefly press the UP button (2) to measure
•
the distance.
• The distance in meters (or yards) is
displayed in the upper right corner of the
display.
• --- m appears on the display in the case of
error or failure to measure the distance.
• The rangefinder will turn off after 3-4 seconds of inactivity. The rangefinder
reticle and obtained range values in the field of view will disappear.
Scan Mode (SCAN)
Press the ON/OFF button (1) briefly to power the device on.
•
Briefly press the UP button (2) to start the rangefinder. The rangefinder
•
reticle will appear on the display.
• Place the rangefinder reticle on the measuring target.
Press and hold down the UP button (2) for 2 seconds to measure the distance
•
in scan mode. A SCAN message will appear in the upper right corner of the
display.
• The distance value will change in real time depending on the visual target
distance.
• Additional settings of the rangefinder are in the main menu item (access the
menu by holding down the MENU button (3)).
Hold down the UP button (2) for 2 seconds to deactivate the Scan Mode.
•
3
ENGLISH
9 16
F
125
m
SCAN