Berker 7531 60 03 Manual Del Usuario página 13

GB
Connection Connection
The device is connected to the EIB at connecting terminal (1).
The supply mains is connected to terminals L and N as shown in
the schematic diagram.
Attention
Disconnect the device from the mains before connecting
the outputs.
The servo-drives are connected in accordance with the schematic
diagram. The diagram shows the connection of outputs 1 and 6.
Outputs 2 thru 5 are connected in the same way.
Important: output terminals
for the connection of servo-drives.
Connecting the N-conductor of the output terminals to further
devices may cause irreparable damage to the actuator.
and N must be exclusively used
GB