Phil & Teds alpha Manual Del Usuario página 8

Safety Warnings
may become too hot for the child's skin.
Always check surfaces before placing a child
in the child seat.
• Do not use any load bearing contact points
other than those described in the instructions
and marked in the child restraint.
• The rigid items and plastic parts of a child
restraint must be so located and installed that
they are not liable, during everyday use of the
vehicle to become trapped by a movable seat
or in a door of the vehicle.
• We recommended that any straps holding
the restraint to the vehicle should be tight,
that any straps restraining the child should be
adjusted to the child's body, and that straps
should not be twisted.
• Important. Please ensure that any lap strap
is worn low down, so that the pelvis is firmly
engaged.
• Never use this child restraint with any other
base except ones that the manufacturer permits.
• Always make sure all vehicle belts and
harness straps are not twisted before each use.
• Never leave the child in the child seat when
the harness straps are loose or undone.
• Do not leave your child in this child restraint
for an extended period of time.
• Always install the child safety seat in a rear-
facing position.
• Never install the child safety seat forward facing.
• Do not use alternative routings not shown in
these instructions.
• Make sure all folding passenger seats are
property latched.
• All occupants of the vehicle should be
correctly restrained. Unrestrained passengers
may be thrown into other passengers and
cause serious injury or death in a crash.
• Always make sure the handle is properly