Tabla de contenido
ENglISh
tyPe 1 trACtOr frAMe
Step 4: (fig. 4)
1. Assemble a 0.9 x 3/8" shoulder bolt (E) and 3/8" whizock
nut (C) to each side of the tractor frame. Tighten.
CAUTION! Muffler is hot! Allow engine to cool
down before proceeding with bumper installation.
3/8" WHIZLOCK
NUT
(C)
Step 5: (fig. 5)
1. Slide the lower slots of the bumper onto the shoulder
bolts you assembled to the tractor frame in step 4.
Step 6: (fig. 6)
1. Assemble a 5/16 x 3/4" lag screw (F) to the bumper
and tractor frame.
2. Repeat for the other side
4
tyPe 2 trACtOr frAMe
Step 4: (fig. 4)
SHOULDER
BOLT
(E)
FIGURE 4
Step 5: (fig. 5)
FIGURE 5
LAG
SCREW
(F)
FIGURE 6
1. Assemble a 3/8 x 1" bolt (G) and 3/8" whizlock nut (C) to
tractor frame through middle slot of the bumper.
2. Tighten and then loosen nut one half turn.
3. Repeat for other side of bumper.
CAUTION! Muffler is hot! Allow engine to cool
down before proceeding with bumper installation.
3/8" x 1"
HEX BOLT
(G)
3/8" WHIZLOCK
1. Assemble a 5/16 x 3/4" hex bolt (I) and 5/16" whizlock
nut (H) to the tractor and bumper. Tighten.
2. Repeat for other side of bumper.
5/16" x 3/4"
HEX BOLT
(I)
5/16" WHIZLOCK
NUT
(H)
FIGURE 4
NUT
(C)
FIGURE 5
Tabla de contenido
