Functional Description - Milwaukee 0730-20 Manual Del Operador

Ocultar thumbs

Contenido

página de 33

/ 33
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

• Check the operation of the lower guard spring.

If the guard and the spring are not operating

properly, they must be serviced before use.

Lower guard may operate sluggishly due to dam-

aged parts, gummy deposits, or a build-up of

debris.

• Lower guard should be retracted manually

only for special cuts such as "plunge cuts"

and "compound cuts." Raise lower guard by

retracting handle and as soon as blade enters the

material, the lower guard must be released. For

all other sawing, the lower guard should operate

automatically.

• Always observe that the lower guard is cov-

ering the blade before placing saw down on

bench or floor. An unprotected, coasting blade will

cause the saw to walk backwards, cutting whatever

is in its path. Be aware of the time it takes for the

blade to stop after switch is released.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

• WARNING Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to cause

cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to filter out microscopic particles.

symbology

Volts

Direct Current

No Load Revolutions per

Minute (RPM)

Underwriters Laboratories, Inc.

United States and Canada

Cat. No. Volts DC No Load RPM Blade Size Arbor Depth of Cut at 90° Depth of Cut at 45°

0730-20

Use only MILWAUKEE M28™ or V28

specificaTions

4200

6-1/2"

battery packs.