Using Your Ceiling Fan - Emerson VERANDA CF542ORB00 Manual Del Usuario

7.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box .
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months, run the Fan Clockwise, as
you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan off and wait for the Blades to stop turning .
Slide the Reverse Switch (located on the side of the
Switch Housing Assembly) to the opposite position, and
turn the Ceiling Fan on again (Figure 29) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
7.2
Check the operation of the fan by gently pulling on the
pull chain switch .
Cut the 3-speed switch pull chain to a desired length
(optional) . Connect the die-cast pendant (supplied)
to the 3-speed switch pull chain by sliding the die-
cast pendant (small hole first) onto the pull chain
(Figure 30) . Attach the chain coupler to the end of the
chain and allow the die-cast pendant to fall down over
the couplers .
Your fan model is equipped with a 4-position,
3-speed pull chain switch (Figure 30) . The operating
sequence is as follows:
Three-Speed
1st Pull — HIGH
2nd Pull — MEDIUM
3rd Pull — LOW
4th Pull — OFF

7. Using Your Ceiling Fan

REVERSE
SWITCH
Figure 29
3-SPEED SWITCH
PULL CHAIN
Figure 30
18
SWITCH HOUSING
ASSEMBLY
SWITCH HOUSING
ASSEMBLY
DIE-CAST PENDANT
CHAIN COUPLER
U.L. Model No.: CF542 & CF552