Final Installation - Luminance Brands Kathy Ireland Home MIDWAY ECO LED CF955LBS00 El Manual Del Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

6.1
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Holes in the
Ceiling Cover (Figure 25).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the Two Knurled Knobs (supplied) (Figure 25).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the Ceiling and the Hole in the
Ceiling Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
6.2
Place the Glass Globe into the Lower Housing, aligning
the Three Flat Areas on the Top Flange of the Glass
Globe with the Three Raised Dimples on the inside of
the Lower Housing (Figure 26).
Then turn the Glass Globe clockwise until it stops
turning.
NOTE: Periodically check that the glass globe is
seated fully clockwise in the lower housing.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan.

6. Final Installation

NOTE: SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.
THREADED
STUD
Figure 25
FLAT AREA
OF GLASS
GLOBE
Figure 26
15
CEILING
COVER
LOCKWASHERS (2)
KNURLED
KNOBS (2)
LOWER
HOUSING
RAISED
DIMPLES (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF955L
GLASS
GLOBE
Tabla de contenido
loading

Tabla de contenido