8.8: Storage Bracket Installation
A Storage Bracket is provided for holding your Remote
Control when not in use . If you desire to use the
Bracket, install it on a wall that is away from excess
heat or humidity .
Slide the Wall Bracket Cover up to expose the Screw
Holes for installation (Figure 38) .
Position the Bracket on the wall in desired location .
Install the Two Screws (supplied) into the Wall Bracket
and tighten to secure to Wall .
Slide the Wall Bracket Cover back down over the
Screws .
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed .
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish .
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish .
SCREWS (2)
Figure 38
9. Maintenance
Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.
22
COVER
STORAGE
BRACKET
HOLES (2)
WARNING
!
U.L. Model No.: CF245L & CF253L