Luminance Brands Kathy Ireland Home CURVA LED INDOOR CF245LBS00 El Manual Del Propietario página 18

7. Optional Installation of No-Light Cover
7.3
Disconnect the LED Light Fixture Assembly wire
terminals from the Fan Motor Assembly wire terminals .
(Figure 30) .
Store the LED Light Fixture Assembly in a safe location
for future installation .
Tuck the Fan Motor Assembly wires and connectors
into the Lower Housing prior to assembling the No-Light
Cover .
7.4
Place the No-Light Cover onto the Lower Housing
aligning the three flat areas on the top flange of the
No-Light Cover with the three Dimples on the inside of
the Lower Housing (Figure 31) .
Then turn the No-Light Cover clockwise until it stops
turning .
Your No-Light Cover is now installed .
FAN MOTOR
ASSEMBLY WIRE
TERMINALS
LED LIGHT
FIXTURE ASSEMBLY
WIRE TERMINALS
LED LIGHT FIXTURE
ASSEMBLY
Figure 30
18
(Continued)
U.L. Model No.: CF245L & CF253L