Luminance Brands Kathy Ireland Home CARRERA GRANDE ECO CF788AP01 El Manual Del Propietario página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3. Ceiling Fan Assembly
3.14
Keep the Hanger Ball engaged with the Pin with one
hand and tighten the Hanger Ball Set Screw with a
Phillips Head Screwdriver using the other hand
(Figure 14) .
Pull up on the Hanger Ball when tightening the Set
Screw .
A loose Set Screw could create Fan wobble .
WARNING
!
It is critical that the pin in the hanger ball is properly
installed and the set screw securely tightened. Failure
to verify that the pin and set screw are properly
installed could result in the fan falling.
3.15
The Fan comes with Black and White Wires that are
80-inches long .
Measure up approximately 6 to 9-inches above top of
Hanger Ball/4 .5" Downrod Assembly (Figure 15) .
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires using wire strippers .
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan .
(Continued)
HANGER BALL
HANGER BALL
Figure 14
1/2-INCH
Figure 15
10
CEILING
CEILING
COVER
COVER
SET SCREW
SETSCREW
DOWNROD
DOWNROD
6 to 9-INCHES
ETL Model No.: CF788
Tabla de contenido
loading

Tabla de contenido