THOMSON THBD47718 Manual De Instrucciones página 35

Too much
bubble pouring
out
Beer flows out
too slowly
If this logo appears on the appliance, it signifies that it should be scrapped
in line with directive 2012/19/UE relating Waste Electronic and Electric
Equipment (WEEE). All dangerous substances contained in electric and
electronic equipment may exert deleterious effects on the environment
and human health during processing. This explains why at the end of its
useful life this appliance should not be disposed of with unsorted municipal
waste. As end consumer your role is essential in ensuring reuse, recycling or
other form of value creation for this
appliance. You have at your disposal several collection and recovery systems put in
place by your local authority (recycling centre) and distributors. You have the obligation
of using these systems.
The warranty does not cover the wear parts of the product, nor the
problems or damage resulting from:
(1) surface deterioration due to normal wear and tear of the product;
(2) defects or deterioration due to contact with liquids and corrosion
caused by rust;
(3) any incident, abuse, misuse, alteration, disassembly or Unauthorized
repair;
(4) improper maintenance, improper use concerning the product or
connection to an incorrect voltage;
(5) any use of accessories not supplied or not approved by the
manufacturer.
The guarantee will be cancelled if the nameplate and / or serial number of
the product are removed.
THOMSON is a brand of Technicolor SA used under licence by ADMEA
This product is imported by: ADMEA - 12 rue Jules Ferry - 93110 Rosny Sous Bois
1. Use a wrong way to
pour beer out
2. The beer temp is high
(best at 3-6°C)
3. The keg is shaken before
usage
4. Almost no beer in the
keg
1. The connection tube or
pouring tube has leakage
1. Use the right way to
pour beer out
2. Cool the beer down
to 3-6°C
3. Put the beer keg
aside a while till no
bubble inside
4. Change a new keg
1. Check whether the
tube is leakage or not, if
so replace the tube
EN-17