THOMSON THBD47718 Manual De Instrucciones página 26

Figure 3
2. Install the tap handle on the tap and ensure both end fit together
perfectly. (Figure3)
3. Install the drip tray into the notch provided. (Figure 4)
4. Plug the beertender.
Note: Do not the plug when your hands are wet. Make sure the voltage
is conformed with the beertender. If the power cord is not well
connected, do not use it and call the service center.
5. The beertender can work without water. To achieve best performance,
put 800mL of water or to the max line into the cooling cavity (Figure 5).
Note: Make sure the drain switch is closed, and no foreign objects in the
cooling cavity. (Figure 6)
Handle
Drip tray
Faucet
EN-8
Figure 4