Changing The Oil - Nogueira SDN-170A Manual De Instrucciones

CHANGING THE OIL:

First change: After the first 10 hours of operation.
Other changes: We recommend changing the oil every 200 hours of operation or once a year.
Oil capacity: 2.6 liters.
Oil changing procedures:
Place the cutting bar in the transport position (fig.27). See detail instructions in this manual.
Place a tray for draining the oil under the bar (fig.27). Remove the oil plug A (fig.25).
Remove plug B and let the oil drain out completely (fig.28). Replace plug B.
Fill the oil in the plug A hole (fig.25) with SAE-90 oil.
fig.28
fig.27
WARNING!
The MAX and MIN markings on the oil dipstick must not be exceeded. Correct oil level will guarantee a
long operating lifetime to the components. An excess or lack of oil can cause overheating in the
transmission, resulting in serious damage to your machine.
SDN-170A
21